產品時間:2018-06-08
The device is specially designed for spray drying of organic solvents (such as alcohol, acetone, NMPN, DMF, etc.) by replacing normal air media with inert gas media formed Closed cycle spray dryer
The device is specially designed for spray drying of organic solvents (such as alcohol, acetone, NMPN, DMF, etc.) by replacing normal air media with inert gas media formed by cyclic nitrogen. In addition to recyclable products, organic solvents can be recycled.
Closed cycle spray dryer Product introduction:
1,The first layer of nitrogen explosion protection: according to the properties of nitrogen inert gas, the whole pipeline uses nitrogen cycle, oxygen content is less than 3% of the system before normal operation.
2,The second layer industrial control explosion-proof, the pressure is higher than 3000 pa. the safety valve opens, may release the pressure, the detailed industrial control procedure please consult the factory technical engineer.
3, The third layer explosion-proof flake, when the pressure inside the drying tower system rises abnormally, the tower top explosion-proof sheet opens automatically to vent the explosion.
4,Fourth floor whole machine explosion-proof, interior with ventilation system (optional, suitable for harmful gases).
Closed cycle spray dryer Characteristics:
1. Can prevent oxidation, avoid danger and improve quality.
2. It is easy to realize aseptic and dustless.
3. Can recover the solvent in the feed liquid.
4. Improve the preservation degree of aromatic components.
5. Can be used for drying or cooling granulation of combustible liquid materials.
6. Can dry very high temperature sensitive material liquid.
7. Can achieve low pollution, no pollution.
8. Can save deodorization device.
9. Drying can be carried out below 100 ℃ at low temperature.
Applicable products:
1. Non-oxidized ceramics, superhard alloy, high-efficiency battery materials.
2. Seasoning, healthy food.
3. Medicine, vitamins, organic medicine.
4. Synthetic resin, wax
上海喬楓經過多年的發展,不斷的引進日本和德國的技術,克服了國內很多物料很難噴霧干燥的難題,比如顆粒很難均勻的難題,平均顆粒15微米以下顆粒很難實現的難題,平均顆粒在100微米以上的難題,顆粒實心圓的難題等。